Polishing Machine With High-speed

700P High-speed Polishing Machine 

700P is a propane-powered high-speed concrete polishing machine, mainly used for industrial and construction purposes, mainly for polishing various untreated floors, such as concrete, stone, terrazzo, cement, etc. This polishing machine can use a variety of fuels, such as propane/gasoline/natural gas/natural gas, etc., which perfectly solves the problem of instability of on-site construction site voltage, resulting in the project cannot be completed and completed on time. The machine is equipped with an integrated control panel, which is fully functional and easy to operate. The 700P polishing machine has a working width of 700mm, which has high polishing efficiency and is suitable for large-area polishing. At the same time, the motor adopts the world famous motor-Baritone brand, which has large horsepower, high efficiency, energy saving and long service life. Its handle and swing lever are detachable, and can be adjusted to the most suitable operating position, packaging position or transportation position according to actual needs.

product features

1. Propane/gasoline/natural gas/gas, etc. can be used to provide power to solve the problem of no power supply. The concrete floor can be polished anytime and anywhere, which is more convenient.

2. Briggs & Stratton engine, with high motor power, large starting torque, high polishing efficiency and good quality, long service life.

3. The retractable and foldable stainless steel handle design is easy to use and ergonomic.

Product parameter

●Integrated motor and frequency converter, better heat dissipation effect

●Integrated control panel, easy to operate

●High-power LED lights are bright enough without attenuation

●Powered by gasoline, propane, natural gas and gas

●Internationally renowned motor, high-voltage and high-power starting

●The 360-degree shock absorption system makes the control more stable and the polishing effect is better.

Expand knowledge about polishing

In the process of constructing concrete sealing and curing agent floors, one of the important steps is polishing, which is mainly divided into preliminary polishing and full polishing. However, it should be noted that in order to make the concrete floor have a high gloss and be more beautiful, the concrete sealing curing agent floor polishing should be completed after the wear-resistant aggregate and concrete penetration hardener technology is perfect.

Concrete sealing curing agent floor polishing refers to the use of professional grinders and grinding discs to use special formulas and techniques for grinding and polishing. Different models of grinders and grinding discs are selected according to needs and experience. The grinding effect will be affected by various factors. Including the ground hardness, the weight of the grinder, the counterweight, whether to add water and the amount of water, the type and quantity of the grinding disc, the size of the grinding disc, the grinding time and the use experience, etc.

FAQ

Q1：How to polish marble?

A1：

1. Finished product protection

2. Dry grinding of resin grinding sheet 50#

3. Spray protective agent

4. Cutting and mending

5. Resin grinding disc HTG-JA 50# 150# for wet grinding

6. Spray hardener

7. Resin grinding disc 300# wet grinding

8. Spray stone protective agent XY-603

9. Crystallization

Q2：How to replace the polishing pad in HP-700P high-speed polishing machine?

A2：Adjust the machine to the raised position, hold the handle with both hands, and stand on the frame with one foot to lift the wheels. Rotate the buckle on the grinding disc in a counterclockwise direction, remove the polishing pad, and then replace it with a new polishing pad.

Hot Tags: Polishing Machine With High-speed，concrete grinder，polishing machine，machine polish with buffer, angle grinder thinset removal, grinding concrete slab, 10 concrete grinder, concrete floor polisher machine, thinset removal grinder, industrial floor grinder