Why Should Cleaned Grinding Discs After Repairing Concrete Floor?

During floor construction,the replaced grinding discs or polishing pads should be cleaned up after every grinding or polishing process in time,in order to avoid the scratches on floor surface due to the inclusion of gravel in next construction. Especially when curing, remember to clean the abrasive discs after repairing the concrete.

The High Tech Grinding Shining Flat Floor system is a dust-free construction process specially used to polish concrete floor. When repairing the floor surface, if it is sprayed with repairing agent and repairing mortar for grinding repair, the diamond grinding pads are stained with the repairing agent, repairing mortar, or other materials need to be cleaned in time, otherwise while it's dry,it would be hard to cleaned up.And if you don't notice that the floor grinder uses these diamond grinding shoes to grind the floor, it will cause damages to the floor surface and may not be repaired, or you may take more time to repair, and this will add troubles to the floor construction.

Therefore, after repairing concrete floor, especially for the grinding repairing, remember to check and clean the metal bond abrasive grinding plate.