300A Wood Floor Polishing Machine

300A wood floor polishing machine

300A wood floor polishing machine is a small grinding and polishing equipment, specially used for polishing wood floors. It is suitable for the polishing of all kinds of new and old wood floors, and has a wide range of applications. It can be used in hotels, homes, offices, etc., and the grinding direction of the grinding and polishing machine is not affected by wood texture, and the polishing efficiency is high. After the 300A wood floor polishing machine is ground and polished, the smoothness of the wood is better and more smooth and beautiful than before. The machine is small in size, light and easy to operate, safe, efficient, high-speed and low-noise. It can be used for floor sanding and polishing, and it can also remove wood chips. It is a rare wood polishing machine.

Reference parameter

Product advantages

1. The work efficiency is 50 times that of a manual electric planer. Equipped with an operating rod to control the operation of the cylinder, the operation is simple, the operation of the cylinder can be performed only by adjusting the position of the operating rod, and the efficiency is extremely high

2. Equipped with 300mm diameter cylinder to equip sandpaper. Lift the drum cover on the front of the machine, move the drum, you can see the chute used to lock the sandpaper, install the sandpaper for polishing work

3. The aluminum motor is used as the power to drive the cylinder and the dust collector. The aluminum motor has high power and good heat dissipation performance and superior quality

Product details show

★The operating rod is used to control the cylinder

★Easy-to-operate control switch

★All aluminum motor as power source

★30mm cylindrical cylinder can be installed with sandpaper

★The silver paint design of the body is more beautiful

★High grinding efficiency of rubber wheels

Packing

1.Do Quality Testing Before Packing;

2.Pack Machine With Poly-wooden Box;

3.Reinforce the Wooden Case and Label the Mark;

4.Send Them to Empty Place for Loading;

5.Load the Container;

6.The Thickness of Crate is 1.57inch.

FAQ

Q1:How to refurbish wooden floors?

A1:

1. Clean up the site: According to the site conditions, clean up the construction obstacles or stickers on the surface of the wooden floor. 2. Rough sanding: Use an imported sanding machine to rough sand the sports wooden floor.

3. Fine sanding: After the rough sanding is completed, use a belt sander for medium and fine sanding, and use a corner sander to sand the corner area.

4. Scrape putty and wood floor caulking: Use putty to mix and polish the wood powder into the putty for the gaps that appear after polishing.

5. Polishing: After three times of rough, medium and fine polishing, use a 300A wood floor polishing machine with sand mesh abrasive to polish the floor.

6. Wood floor cleaning treatment: After the polishing step is completed, use a vacuum cleaner and cleaner to completely clean the wood floor.

7. Apply primer: Apply the primer once to the wooden floor with a special applicator, and let it dry for 12 hours.

Q2:What is stone polishing?

A2: Stone grinding and polishing is a prelude to stone crystal surface treatment or a necessary process in stone processing. The main principle is the physical and chemical combination of the pressure, high-speed grinding force, and frictional heat of the mechanical grinding disc using a pressed grinding block synthesized from inorganic acids, metal oxides, etc., and the action of water on a relatively smooth marble surface. , Thereby forming a new bright crystal layer. This crystal layer has super bright and clear luminosity. The luminosity can reach 90-100 degrees. This crystal layer is a modified compound crystal layer of the stone surface (1-2mm thick).

Hot Tags: 300a wood floor polishing machine, China, manufacturer, supplier, factory, diamond floor grinder